How To Get In Touch
Please find our contact detail below. Or, simply fill out the form and one of our team will get back to you as soon as possible.
Most shutter faults can be fixed without replacing the shutter. iStyle Shutters supplies and installs plantation shutters, so we know how they are put together, and we will tell you plainly if a panel is not worth repairing.

Our plantation shutter repairs cover the parts that wear or break with daily use, including louvres, tension mechanisms, hinges, tilt rods, frames, catches, and sliding or bi-fold tracks. If a shutter no longer opens, closes, or holds its position the way it did when it was fitted, it can usually be repaired.
We repair shutters for homeowners, landlords, and property managers, including shutters that came with the house.
Many window shutter repairs can be completed in a single visit. More complex repairs, such as rebuilding a damaged panel, may require additional work before the panel can be refitted.
Not sure whether to repair your existing shutters or replace them? You can compare repair costs with new plantation shutters before making a decision.
Repairing a damaged shutter usually costs less than replacing it and keeps the panel matched to the rest of the
room.
When replacement makes more sense. Some shutters are not worth repairing. A frame warped by moisture, several broken louvres across several panels, or split timber stiles usually point to replacement. We will show you what we found and give you both options, so the choice is yours.
Most shutter faults show up as a louvre that will not stay put, a panel that drags or a part that has come loose, and each has a standard fix. Start with the problem you can see.
| Problem you notice | Likely cause | Usual repair |
|---|---|---|
| Louvres flop shut or will not stay open | Tension has loosened | Adjust or replace the tension screws or tension system |
| A louvre is cracked, snapped or has fallen out | Broken louvre or pivot pin | Fit a replacement louvre or new pins |
| Louvres no longer move together | The tilt rod has come away, or its staples have pulled out | Reattach or replace the tilt rod and staples |
| Panel drops, drags on the frame or will not close | Loose or worn hinges, or a frame out of square | Tighten, pack or replace hinges; rehang and realign the panel |
| Panel will not stay shut | Magnet or catch missing or misaligned | Replace or reposition the magnet or catch |
| Sliding or bi-fold panels stick | Worn wheels, debris in the track or a loose track | Clean, adjust or replace the track hardware |
Timber can usually be filled, sanded and repainted, while damaged PVC louvres are usually replaced rather than patched. The moving parts repair the same way on both.
Dents, cracked louvres, chipped paint and swelling in damp rooms. Timber shutter repairs often include a touch-up to match the original finish. Our basswood plantation shutters are made for dry rooms, not wet areas.
Louvres can crack or bow and cannot be sanded and refinished like timber, so a damaged louvre is replaced. Hinges, tension and tilt rods repair as on timber.
Typically, the process from consultation to final installation takes between 2 and 4 weeks. For urgent jobs, such as replacing plantation shutters, bathroom fixtures, or urgent plantation shutter repairs, we offer priority booking. Furthermore, we accommodate your schedule, including after-hours and weekend appointments for maximum convenience across Sydney, Australia.
Thermastyle plantation shutters have a repairable, recoatable surface and a 20-year warranty. [Confirm whether a Thermastyle fault is handled as a warranty claim.] See how Thermastyle compares with PVC.
A repair takes one inspection visit, a written quote and then the repair itself.
We supply and install plantation shutters, so our technicians know how they are built and where they tend to
fail.
We repair shutters across Sydney’s Eastern Suburbs and the inner city including homes near our plantation shutters in Maroubra and plantation shutters in Matraville service pages. If you are searching for plantation shutters repair near me, send your suburb and we will confirm a visit time.
Most plantation shutters can be repaired. Loose louvres, lost tension, worn hinges and broken tilt rods are all
standard fixes. Replacement makes more sense when the frame has warped or many louvres are broken across
several panels. Regular care helps too: see how to maintain your plantation shutters.
The cost depends on the part and how many panels need work, and we confirm it in a written quote after inspection. If you are weighing up new shutters instead, see our guide to plantation shutter costs in Sydney.
Sagging is usually caused by loose or worn hinges, or a frame that has moved out of square. Tightening the hinge screws is a safe first step. If the panel still drops, it needs packing, new hinges or realigning, which is a job for a
technician.
Yes. A single broken louvre can be replaced without replacing the whole panel. We match the new louvre to the width and colour of the others.
Yes. Hinges, tension, tilt rods and catches on PVC shutters repair the same way as on timber. A cracked or bowed PVC louvre is usually replaced rather than patched, because PVC cannot be sanded and refinished.
At iStyle Shutters, people love our commitment to quality, style, and customer satisfaction. Our shutters are praised for their sleek designs, durability, and how they perfectly complement any home. Clients appreciate our friendly service, attention to detail, and timely installations, making us a trusted name for window coverings.
Tell us what has gone wrong and we will tell you how to fix it. Send your suburb, the number of panels affected and a photo, and we will arrange an inspection and a written quote.